Geocell For Sale

HDPE Geocell is a kind of cellular confinement system, which is also called Geocell grid, or Geocell ground grid. It is made from HDPE (high-density polyethylene) sheets through ultrasonic welding to a 3-dimensional network structure. It is used to help improve the performance of standard construction materials and erosion control treatments. Excell system can be filled with a wide range of materials: aggregate, concrete, sand, soil, etc.

Different kinds of Geocell for sale

1, Height:

From 50mm to 300mm, regular types are 50mm, 75mm, 100mm, 150mm, and 200mm, which are the most popular heights used on different kinds of Geocell projects.

2, Welding Distance:

From 300mm to 1000mm, regular types are 330mm, 356mm, 445mm, 660mm, and 712mm which are widely used on different kinds of Geocell projects.

3, Smooth & Textured Surface

Perforations and a textured surface increase the friction angle between aggregate infill and the cell wall, generating better aggregate lockup and greater overall load distribution.

4, Perforated & No-Perforated type

Perforations facilitate parallel slope drainage of the infilled cell. In saturated conditions, the removal of excess water increases infill friction, reducing downslope sliding forces, resulting in a more stable system.

5, Colors

Black, green, gray, sand, and yellow colors are available for us.

Our Geocell Technical Specifications

Excell – GB standard – Quality standard

Carbon Black content ASTM D 1603 ≥1.5%
Density ASTM D 1505 ≥0.94g/cm3
Sheet Thickness ASTM D 5199 1.5mm
Seam Peel Strength USACE GL-86-19 ≥10KN/m
Tensile strength at Yield ASTM D 638 ≥16KN/m

Excell – ASTM standard – Quality Standard

Carbon Black content ASTM D 1603 ≥1.5%
Density ASTM D 1505 0.935-0.965g/cm3
Sheet Thickness ASTM D 5199 1.5mm
Seam Peel Strength USACE GL-86-19 ≥14.2KN/m
Tensile strength at Yield ASTM D 638 ≥22KN/m
Environmental stress crack resistance ASTM D 1693 ≥5000hrs
OIT oxidation induction time ASTM D 3895 ≥150min